Pneumatic Ball Valves Category

(10 companies)
  • DynaQuip Controls

    DynaQuip Controls is a designer and manufacturer of the DynaMatic Series pneumatic actuators with ball valves. Pneumatic ball valves come in brass 2 piece, bronze 3 piece, brass 3 way, stainless 2 & 3 piece, and stainless 3 way configurations.

    State: MO
  • Georg Fischer

    Georg Fischer LLC offers a variety of pneumatic ball valves, including the Type 285 available in both horizontal and vertical versions. Each type is available in either manual, electric or pneumatically actuated. The Type 230 series pneumatic ball valves are suited for the high demands of the industrial world.

    State: CA
  • A-T Controls

    AT Controls offers Series 38 three way threaded automated ball valves available for mixing and diverting services (L or T port). The ISO 5211 actuator mounting pad allows for pneumatic or electric actuation. Pneumatic ball valves feature a reduced port valve, 1000 psi WOG, available in 1/4" to 2", and a 316SS body, ball and stem.

    State: OH
  • Teqcom Industries

    Teqcom Industries is a manufacturer of PTFE pneumatic ball valves. These are 1/4 turn, two way, manual pneumatic ball valves. Specs include 1/2" port size, 1/2" orifice, and NPT end connections.

    State: CA
  • Erdmann Corp.

    Erdmann is a distributor of industrial valves, offering cast split-body flanged metal seated ball valves with gear or pneumatic actuators. The off-center split-body design allows the use of advanced spiral-wound gaskets. Maximum temperature for CF8M steel is 1,000°F (538°C), and for WCB steel is 800°F(426°C).

    State: KY
  • Compressed Air Systems

    Compressed Air Systems sells, services and rents all types of pneumatic tools and equipment. The NPT drain tap bronze ball valve is recommended for air and water service, has ratings to 125 PSI WOG, and vents downstream air for pneumatic systems (OSHA regulations).

    State: FL
  • F.W. Webb Co.

    F.W. Webb serves the process industry in New England and New York with Kentrol pneumatic and electric ball valves (Kentrol acts as a stocking manufacturer's representative). Offerings include segmented ball, globe, high performance butterfly, and metal seated ball valves designed to meet "Entech" specifications.

    State: MA
  • TVI (Thermoplastic Valves, Inc. )

    TVI is a distributor of EPA electric and pneumatic actuators that feature universal joint extensions, 2" square operating nuts, and ball valve stem extensions.

    State: PA
  • Lee Industries

    Lee Industries is a designer and manufacturer of jacketed  ball valves that can be equipped with several types of pneumatic air-to-air or spring-return actuators. These jacketed ball valves are 3A sanitary and USDA-M&P accepted and certified. Sizes range from 1 1/2” to 4”.

    State: PA
  • IAC (Industrial Accessories Co.)

    IAC offers full port, standard port, reduced port and V-port pneumatic ball valves. Types available include a stainless steel 2-way full port ball valve with a double acting pneumatic actuator. These are designed for shutoff applications and preferred to globe and gate valves for this purpose.

    State: KS