Circle Valve Technologies, Inc. offers selector valves in the following models: 9359B-2PPQ, 9359B-2PPP, 9333B-2PPQ, 9333B-2PPP, and 9332B-2PPP. These valves have the following features: very low turning torques, minimum pressure drops, no stem leakages, effortless/fingertip operations, positive position indications, and throttling service compatibility. They have operating pressures ranging from 0 to 150 PSIG, temperature ranges from 0 to 300°F, and 1/4" connection sizes.

The Specialty Mfg. Co. (SMC) offers a wide range of selector valve models, including: routing, 735 five-way ball, 734 four-way ball, 711 rolover, and 326 three-way ball. Model MRV 2-2NO multi-function routing valves feature operating pressures ranging from 0 to 125 PSI, operating temperatures ranging from -25 to 180°F, flow rates up to 2.7 SCFM, and toggle actuation force tested at 50 PSI. These valves are constructed from 302 stainless steel and electroless nickel plated brass materials. The Specialty Mfg. also offers dual toggle valves, 835 five-way ball valves, 701 three-way ball valves, and 752 three-way ball valves.

VICI Valco has a variety of low-pressure flowpath selectors, including common outlet, flow-through, trapping, trapping/flow and dead end. All VICI SD, ST and STF selectors are made from Nitronic 60, with rotors made from a polyaryletherketone/PFTE composite, known as Valco E. The valves range in rating from 100 to 400 psi for gas, and temperatures from 75C to 200C. All of the flowpath selector valves can be manually or automatically actuated with either electric or pneumatic systems.

EVSCO has a range of 4-way pneumatic actuated selector valves in air-to-spring, air-to-air and electric. Air-to-air and air-to-air selector valves are double acting with an air to spring return at 40 psi. 4-way electric selector valves have 115 VAC reversible motor standard, and a 12/24 VDC and 24 or 230 VAC reversible motor. Electric selectors have NEMA IV construction, and are available in 360-degree setups.

Conant Controls have a variety of selector valves in either teflon or stainless steel rotors, as well as weatherproof electrical operators. Selector valves with teflon rotors eliminates the need for lubrication, and are designed for instrument air systems. Selector valves with solid stainless rotors are suggested for severe systems, and have the largest size and material range. Conant's electrical operators have a weatherproof housing (also available in explosion-proof) and are designed to automate Conant 2-, 3-, 4- and 5way precision selector valves.

Saint-Gobain Performance has two styles of Furon Stopcock manual selector valves in 2-, 3- and 4-way, in both standard and panel-mounted formats. Both styles can be used as diverting, mixing or a shut-off valve, and operate similar to a ball valve. Porting sizes are available in Imperial or metric.

Wojanis Hydraulic have selector valves available in both single and double selector formats. Single selector valves are two position, and range from 20 to 40 GPM, and are available with NPT, SAE or NPTF ports.  Double selector valves are two position, six-way detented selectors and are available with either SAE or NPT ports.

Hydraulic Controls offer selector/divider 3-way valves in port sizes 1/2", 3/4" NPT and SAE #16, and all are designed for an operating pressure of 3000 psi.

Thrush Co offers bronze vented double-L selector valves, designed to balance circuits and mix water for radiant heating.

Orr & Orr have two formats of motor driven selector valve kits--three- and six-port systems. Both valves come with an installation sheet, connector and switch.

Jensen Inert Products has a TFE check/foot selector valves to prevent water backflow down tubing into wells. Available styles include one piece body and two piece threaded with S.S. screens. One piece bodies are available in 5/16, 1/4 and 1/2 inch stems with ball diameters from 1/8 to 1/2 inch.

Swagelok has the Swagelok Stream Selector System for process analyzer applications, designed for double-block-and-bleed (DBB) operation, and can accommodate between 2-12 process streams. Each individual DBB has a pneumatic actuator and a flange, can operate up to 250 psig, and can function from 20 to 300F.

JL White has a range of injector, selector and switching low-, high- and ultra high-pressure valves. Low-pressure valves are designed to function up to 200 psi; high-pressure valves up to 12,000 psi and Ultra high-pressure up to 25,000 psi. Other valves, including shut-off, inline-check, micro-metering and micro-splitter valves are also available.

Pneumadyne have six-position selector valves that allow actuation of six individual circuits from a common input. Pneumadyne selector valves include detented knobs, 10-32F ports, black anodized surface and a panel mount.