Solenoid Valves Category

(41 companies)

Solenoid Valves in New Jersey

  • Magnatrol

    Magnatrol Valve Corporation manufactures an extensive line of industrial solenoid valves in 2 way, bronze and stainless steel designs, as well as normally closed and normally open configurations. Solenoid valves are offered in a size range from 1/4 to 3 inches with up to 500 psig. Other solenoid valves include pilot tap, flanged ends, din connector,  leak/dead tight, hum free, watertight/explosion proof solenoids, NEMA 4X and nickel plating.

    State: NJ
  • Asco Valves

    Asco produces electronically enhanced and micro-miniature solenoid valves. Valves are configured in 2-, 3- and 4-way, manual reset, direct mount, group mounted, dust collector, condensate drain valve assemblies, isolation, medical/analytical, pinch and S series designs.

    State: CA
  • Clark-Cooper Div.

    Clark Cooper manufactures a variety of solenoid valves, including general service, high pressure and rotary shaft styles. General service solenoid valves feature bronze or stainless steel materials, pipe size ranges from 1/2 to 3 inches, pressures up to 500 psig, and temperatures up to 400 degrees Fahrenheit.

    State: NJ
  • Valcor

    Valcor Engineering Corporation supplies  solenoid valve types such as general & multi purpose, cryogenic service, diaphragm isolated, instrumentation class and Teflon isolated. General/multi purpose solenoid valves are available in stainless steel or brass body construction, designs of 2 way, 3 way and 4 way, and seal materials of Buna, Viton, EPR, Teflon and Rulon. Cryogenic solenoid valves are operated with normally open and normally closed configurations with a fluid temperature range from –450°F to 400°F. Instrument valves range in sizes from  3/4” to 1.5 ”, as well as normally closed, normally open, three way, alternate mounting and manifold configurations. Diaphragm isolated solenoid valves are offered in normally closed, normally open and three way designs. Teflon diaphragm isolated solenoid valves feature all Teflon construction, low internal volume, low wattage, and designs including normally closed, normally open and three way.

    State: NJ
  • Plast-O-Matic Valves, Inc.

    Plastomatic Valves, Inc. offers True Blue solenoid valves for flow control in various body designs and coil combinations. The True Blue series of valves are 1" NPT pilot-operated solenoid valves with PVC body designs and FKM seal designs. Series EAST valves are compact plastic solenoid valves with high pressure ratings, PTFE bellows barrier seals, and Fail Dry safety vents. Series EASMT are suited for high flows and high pressures and available in ½", ¾" and 1" sizes. The EASYMT series are suited for high flows and high flow rates and available in ¼" and ½" sizes. With bubble tight shutoff, Series PS features  PTFE bellows dynamic seal and upper diaphragm seal with Fail Dry safety vent, and is available in ½", ¾", 1", 1½", 2" and 3" sizes. Suited for pressure, drain or vacuum service, the Series EASY-NO (normally open) features a tight shutoff, PTFE shaft, a 4 u-cup seal, plus upper seal with Fail Dry safety vent and ¼" and ½" NPT sizes. The Series THP 3-way design features a non-sticking shaft with an upper and lower diaphragm, and secondary seals with Fail Dry safety vents in ¼" and ½" NPT sizes.

    Cedar Grove
    State: NJ