Clippard supplies a line of solenoid valves in multiple designs and model types. Solenoid valves include 1/8 and 1/4 inch NPT direct acting 2-way solenoid valves, 1/8 inch NPT direct acting 2-way stacking solenoid valves, 1/8, 1/4, 3/8, and 1/2 inch 3 way solenoid valves, 1/8, 1/4, 3/8, and 1/2 inch NPT 3 way double solenoid valves, 1/8 and 1/4 inch NPT direct acting 3 way double solenoid valves, 3/8 and 1/2 inch 5 port 4-way double solenoid valves, 1/8, 1/4, and 3/8 inch 5 port 4-way single solenoid valves.

Dema manufactures solenoid valves such as high pressure valves, line strainers, manifold valves, normally closed valves and normally open valves. High pressure solenoid valves are normally closed brass valves with a 1200 psi maximum operating pressure, stainless steel sleeves and seats, and sizes of 3/8", 1/2" and 1" NPT. Their line of manifold valves includes normally closed brass manifold valves in 1, 2, 3, 4 or 5 stations in Model 492M2M and 492M2. Normally closed solenoid valves are offered in various models with a variety of voltages, body materials and maximum operating pressures. Normally open valves includes normally open brass diaphragm valves in 3/8", 1/2" and 3/4" NPT, as well as normally open high pressure piston valves rated up to 1000 psi with 3/8" NPT connection.

G.W. Lisk offers a line of solenoid products such as linear solenoids, rotary solenoids, solenoid valves, AC and proportional solenoids, and military/aerospace solenoid valves. Solenoid valves feature atmospheric pressure to 40,000 psi design, hydraulic and pneumatic media, premium materials with corrosion resistance coatings, direct and pilot operation, explosion proof, fuel control, fuel shutoff valve, and heavy duty hydraulic control and advanced exhaust gas recirculation. Valve designs include normally closed and open designs as well as 2, 3, 4, and 5 way solenoid valve designs.

Horton includes multiple solenoid valves in its product selection. The HC1000 is a normally open solenoid activated fluid control valve suited for coil energization. Ideal for hot and cold water operations, the L10 valves are two-solenoid, pilot operated valves suited with side-by-side coils. Ideal for laundry and car wash operations, the N10 valve is a two solenoid pilot-operated mixing valve with opposed coils. Also ideal for hot and cold water operations, the N50 type valves are two-solenoid, pilot-operated valves. Ideal for ice makers, vending and dispensing, and water-spray systems, the S30 is a single solenoid type valve.

SMC supplies solenoid valves and manifolds with 4 and 5 ports, 3 ports, 2 ports and proportional designs. Their numerous series' includes various mounting styles (body ported, base, manifold), sizes, actuator applications and power usage.

PneuMagnetic has available a line of stocked actuators such as ASCO and Parker solenoid valves, as well as a line of non-stocked actuators such as ASCO, SMC USA and Parker-Skinner solenoid valves. ASCO and Parker solenoid valves are replacement actuators for solenoid valve coils whereas the ASCO, SMC USA and Parker-Skinner solenoid valves are non-stocked replacement actuators for solenoid valve coils.

Ryan Herco Flow Solutions is a distributor of solenoid valves from such manufacturers as Plastomatic, Hayward, +GF+, Ingersoll-Rand, Saing Gabain/Furon and others. Types of Plastomatic valves available include direct-acting, mini direct-acting, pilot-operated, 3-way and wetted-core solenoid valves. Hayward electric solenoid valves are available in PVC and CPVC. +GF+ solenoid valves include PVC, teflon, brass, PVDF and brass pneumatic control. Offerings from Ingersoll-Rand include 2-way, 2-way brass, 2-way teflon, 4-way brass, and valves parts and accessories. Herco carries Saint Gobain/Furon solenoid valves in both 2-way and 3-way configurations. Other manufacturers that Herco distributes for include ARCO solenoid pinch valves.

Lee is a family operation manufacturing solenoid control and solenoid inert valves for fluid handling systems. Solenoid control valves feature small size with a life cycle of over 200 million cycles. These valves are often customized to meet OEM requirements. Types include 2-way piloting (non-inert), 3-way, 3-way (non-inert) and 3-way latching (non-inert). Solenoid inert valves are used in medical and scientific instrumentation applications where contamination is the main concern. These valves are also designed for OEM requirements. Types include 2-way, 2-way with injection port, 3-way, and 3-way for low turbulence.

Target Rock manufactures solenoid operated isolation valves for containment isolation, sampling, reactor head vent and power operated relief valve applications. Specs include sizes from 3/8 in. to 6 in (150 mm), pressures to 2500 psi (17 MPa), 48 VDC to 220 VAC, and IEEE 323, IEEE 344, ASME III, ASME QME-1. These solenoid operated isolation valves are smaller and lighter than motor or air operated valves, and require lower power (no three phase power cable or motor control centers).

Solenoid valves from Allenair are manufactured as either 2-way or 3-way types. General purpose solenoid valves are available as normally closed, normally open or multi-purpose. All types can be supplied in various operating pressure ranges with 1/8" or 1/4" NPT ports. Explosion proof solenoid valves are also manufactured by Allenair in 2- or 3-way types with standard flow characteristics. These valves are UL listed for use in hazardous locations Class I, Groups C & D (NEMA 7) and Class II, Groups E, F & G (NEMA 9).

B/C Valve manufactures solenoid valves for both consumer and industrial applications. Their NSF Series is approved for drinking water safety. Their E-Series of solenoid valves is designed for medium to light duty applications. The I-Series is industrial grade for rigorous applications. B/C Valve also manufactures positive control irrigation solenoid valves for the irrigation market.

Circle Seal Controls is a manufacturer of 2-way and 3-way solenoid valves for gas or liquid service. Available body materials include brass, 303 stainless steel and aluminum. These valves are pressure rated to 3000 psig (207 barg) and vacuum to 6000 psig (404 barg). Temperature range is -65° to +160° F (-54° to +71° C).

Manufacturing micro solenoid valves is Farmington Engineering's specialty. They offer a 2-way/2-position solenoid valve in a normally closed (N.C.), manifold mount configuration, suitable for shutting off liquid and gaseous fluids. A 3-way/2-position solenoid valve in a normally closed, 10-32 configuration is available for plumbing, medical/dental, beverage and steam applications. Farmington also manufactures a 3-way/2-position solenoid valve in a normally closed, manifold mount configuration.

GC Valves is a distributor of a variety of solenoid valve types. Direct acting solenoid valves come in 2-way and 3-way configurations with 1/8", 1/4", 3/8" NPT ports. Piloted diaphragm solenoid valves are offered in 2-way normally closed and normally open types with vacuum to 250 psi. GC Valves also carries zero differential piloted diaphragm, piloted piston, lever acting universal, and special purpose solenoid valves.

Gould manufactures types A, B, D, K, M & Q (packless), internal piston, pilot operated solenoid valves that require a 5 PSI minimum operatin pressure differential. Types F, G, GX, B3, AD, QD, & KD are direct acting solenoid valves that do not require a minimum operating differential pressure. ALL standard valves are supplied with continuous duty coils of the proper class of insulation for the service indicated on the nameplate.