Menu

Plastic Ball Valves Category

(20 companies)
  • Specialty Mfg Co.

    SMC is a manufacturer of plastic ball valves. Features include hose barb, pipe thread (NPT), Jaco, push-fit and socket end configurations; polypropylene, PVC, nylon and PVDF (Kynar) materials; ethylene propylene, Buna-N and fluoroelastomer (Viton) seal materials; for water beverage, air, mixing and sampling, and chemical applications. Types include two-way right angle, two-way, three-way trunnion, three-way and T-Link plastic ball valves.

    Saint Paul
    State: MN
  • Simtech

    Simtech is a provider of plastic ball valves in many configurations. They offer manually actuated, pneumatically actuated and electrically actuated true union plastic ball valves, as well as true union and true union three way plastic ball valves with locking handles. Simtech also provides manual compact molded in place and two piece molded in place plastic ball valves.

    Levittown
    State: PA
  • U.S. Plastic Corp.

    US Plastic carries valves from many manufacturers, including 2-way, 3-way and true unnion types. Plastic ball valves offered include PVC, compact PVC, PVC ball metering, PVC compression stop, PVC industrial and PVC single entry industrial, and PVC utility ball valves.

    Lima
    State: OH
  • Industrial Specialties Mfg.

    Industrial Specialties offers over a dozen types of plastic ball valves in many configurations, including panel mount, right-angle, acetal, polypropylene, trunnion, 2-way, 3-way and more. There is a series of economical plastic ball valves available as well. Acetal ball valves come with push-in and male NPT end options. Trunnion plastic ball valves offer a maximum operating pressure of 125 psi and a 140° F maximum operating temperature.

    Englewood
    State: CO
  • Parker Hannifin

    Parker makes PFA and PTFE ball valves, with PTFE wetted construction and HDPE, PVDF, and PVC non-wetted construction, with a 25 degree HG vacuum to 0 - 120 PSIG, and ambient temperature ranges from -60F to 176F and fluid temperature ranges from -60 to 400F.

    Cleveland
    State: OH
    Website
  • Freckleface.com

    Freckleface.com offers plastic ball valves, including true union type and 4-bolt, 6-bolt, and 8-bolt type, made of polypropylene. Their true union valves operate up to 125PSI at 140F, with EPDM seals (Viton or Buna optional), T-handle, and multiple O-ring seals. Their X-series bolt valves have Viton O-rings and Teflon self-lubricating stem bushings and seats.

  • TVI (Thermoplastic Valves, Inc.)

    Thermoplastic Valves Inc. manufactures four plastic ball valve types: strong union, compact, ball check and safety block. The company's compact 1/2"-4" ball valves are available with socket, threaded end connections, while the safety block valves are available in true union or standard 4" design. The 1/2" - 4" ball check valves require less than 1 psi to open, and the 6" strong union valves are flanged type with a three-piece body design.

     

    State: PA
    Website
  • Assured Automation

    Assured Automation offers the PBV Series PVC plastic ball valves. These are full port, PVC or CPVC thermoplastic automated ball valves with NPT and socket weld end caps. Materials include PTFE seats, Viton or EPDM seals, and PVC or CPVC bodies, balls and stems. Actuators are available in electric, pneumatic or manual handle. Typical applications include seawater, corrosive liquids, pollution control, process control, bottle dispensing and chemical process equipment.

    Clark
    State: NJ
    Website
  • Plast-O-Matic Valves, Inc.

    Plast-O-Matic manufactures manual ball valves in CPVC, PVC, Polypro and PVDF. Design advantages include large diameter shafts to eliminate stem breakage, double shaft O-rings, and PTFE shaft bearings to eliminate friction and wear. These plastic ball valves are now available in 3' and 4" sizes and are pressure rated at 175 PSI (11,91 BAR).

    Cedar Grove
    State: NJ
    Website
  • Hayward

    Hayward makes plastic true union manual ball valves, with a full port design and double stem seals, with reversible PTFE seats. These valves come in sizes from 1/4" to 6", made of PCV, Corzan, CPVC, and PPL, with an optional 2" square operating nut, stem extensions, spring return handle, valve safe lockout, and more.

    Clemmons
    State: NC
    Website
  • Capital Rubber Corp.

    Capital Rubber Corporation offers polypropylene ball valves, in sizes from 1/2" to 4", in 6-bolt or 4-bolt types, with standard NPT thread female ends. They are also available upon request with Male x Female NPT ends, 4-bolt flanged ends, cam lock male x NPT female ends, and are in full port style.

    Wood Dale
    State: IL
    Website
  • Flowserve

    Flowserve is a supplier of control and and quarter turn-type plastic ball valves manufactured by Atomac, Worcestor Controls, NAVAL, Valtek, NAF, and Noble Alloy.

    Irving
    State: TX
    Website
  • Green Leaf Corp

    Green Leaf Incorporated makes plastic ball valves with precision machined ball and multiple O=ring seals, and come in sizes from 1/2" to 4", in true union, 3-way, bolt (4 and 6 bolt types), and nozzle style valves. Their single union valves offer PTFE seats and EPDM seals.

    Fontanet
    State: IN
    Website
  • Georg Fischer

    Georg Fischer manufactures manual and actuated plastic ball valves. The company's line of manual ball valves are available in true union, true union metering, and laboratory ball cock design. The line of electrically and pneumatically-actuated, plastic ball valves are available in 3-way construction.

    State: CA
    Website
  • EVSCO

    EVSCO manufactures crossover, 4- and 5-way plastic ball valves intended to be an alternative solution to true union plastic ball valves. The company's ball valve alternative  features manual, electric or pneumatic actuation; and is available in 1/8", 1/4" 3/8", 1/2", 3/4", 1 1/2", and 2" FNPT sizes.

    State: IL
    Website